Pages

Saturday, November 17, 2012

TURKEY SPIN





               HAPPY      
     THANKSGIVING!!!


Here is another way to use the  Big Wheel Spinner I made here. I know this wheel spinner isn't something many of you will make, so I do have another option I'll tell you about later.  




This is how I made this Turkey Spinner

  • Cut out some small sized feather shapes from various colored card stock and adhere permanently to the back of the turkey so that the turkey isn't so "naked" by the time the other feathers are pulled out.  Laminate the combined body and feathers. Decorate the feathers making a squiggle line with glue and glitter.
  • Cut out some medium sized feathers from various colored card stock, laminate and attach popsicle sticks to the bottom of the feathers so they can be inserted into the styrofoam turkey body.  Decorate making a zig-zag line along the top of the feather with glue and glitter.
  • Cut out some large sized feathers from various colored card stock and laminate. Decorate making a swirl design at the top of the feather with glue and glitter. Adhere two square pieces of the loop side of Velcro on each of the corners of the feathers on the back side. Leave the hook side attached to the loop so it is easier to know where to place the hook side on the spinner. Attach the large feathers on the spinner equally. Make sure your feathers are short enough to allow a space in the center for where the turkey body will be attached.
    • I don't have a template for the feathers to give you. The shape is just a rounded, rectangular teardrop I freehanded at the time. The size would depend on your spinner. I did eight feathers for each size.

Small feathers and turkey
Medium feathers
Large feathers














  • Turkey Body
    • Print and cut out the turkey body. File attached. Attach the small feathers to the back and laminate. See small feather instructions above. After it has been laminated, you can glue on some large google eyes. It gives it a more fun and animated.
    • Get a round styrofoam disk about 6" x 1 1/4". With some brown craft paint, paint around the edges and about an inch into both of the flat sides of the disk—you could paint it completely, but it will be covered with paper anyway.
    • Back side of disk
    • After the paint is dry, glue a circle of brown card stock on each side with a hot glue gun. The paper gives the Velcro something to stick to.
    • Take a 2" strip of clear Velcro and cut lengthwise down the center so you have 2 long, skinny strips. Adhere both of the loop sides (soft & white side) of the Velcro strips to one side of the disk.  Leave the hook side (clear & rough) of the Velcro mated to the loop side. Remove the release liner of the hook side of the tape and adhere it to the spinner wheel in the center. The Velcro allows it to be removed so the spinner can be used for other games.
    • Take a square piece of clear Velcro and attach the loop side to the front of the disk in the center. Leave the clear, hook piece mated to the loop. Remove the release liner from the hook side of the square piece of Velcro on the front of the styrofoam disk and center and attach the turkey and small feathers that have been laminated together onto the styrofoam disk.
  • Insert the medium sized feathers with the popsicle sticks around the styrofoam disk. They will be between the large feathers on the spinner and the small feathers on the turkey.
HOW TO SPIN AND SING
  • If laminated, use wet erase markers to write on the back of the large feathers the songs and page numbers to sing.
  • On the back of the medium feathers with wet erase markers, write "how to sing" the song, e.g. clap to the rhythm, staccato, fast/slow, your teacher's favorite song, etc.
  • Let two children come up and each takes a turn to spin. One spins for the song and one spins for the "how to sing".
  • Now, spin away!!!

I've attached a file with a turkey body and some ovally-shaped feathers if you want to just make a turkey that you can post on a board and have the children pick feathers from to choose songs. You could leave the feathers off and scatter them on the board or around the room and have the children pick/find a feather, add it to the turkey, then sing the song. There are colored feathers if you want to print on colored card stock or a black and white one you could use to color them in yourself. Just print how many feathers you want your bird to have.

Instead of a poster, another option, if you want more of a 3-D look, is to get a bigger and fatter styrofoam disk or ball, cut in half and paint, adhere the turkey you've cut out, use smaller pieces of popsicle sticks to adhere to the bottom of the feathers and pluck the feathers out or stick them in the turkey for the songs. You may have to weigh the styrofoam down a little so it won't topple over as easily.

I'll post another way I used this with a Sing-a-Story next.






No comments:

Post a Comment